XRAY Messing Aufhängungshalter - einteilig - hinten - FR
Authentic XRAY brass front lower suspension holder for the REAR of the front bulkhead. Adds additional weight to the car to attain the minimum weight limit, and replaces other chassis-mounted weights which negatively influence chassis flex.
The brass holders are 3x heavier than aluminum holders, they place the extra weight equally on left and right sides, and they keep the CG as low as possible while not introducing negative flex to the chassis. Moreover, the brass holders also influence the handling characteristics, and may be used for further fine-tuning the car’s set-up.
XRAY T4 2015 Specs
XRAY T4 2016 Specs
XRAY T4 2017 Specs
The brass holders are 3x heavier than aluminum holders, they place the extra weight equally on left and right sides, and they keep the CG as low as possible while not introducing negative flex to the chassis. Moreover, the brass holders also influence the handling characteristics, and may be used for further fine-tuning the car’s set-up.
Using the brass holders in the FRONT reduces traction roll.
Recommended for high-traction conditions.
Using the brass holders in the REAR improves the car’s rotation and steering.
Recommended for medium-traction conditions.
Recommended for high-traction conditions.
Using the brass holders in the REAR improves the car’s rotation and steering.
Recommended for medium-traction conditions.
XRAY T4 2015 Specs XRAY T4 2016 Specs XRAY T4 2017 Specs
Hersteller:
XRAY s.r.o.
K Vystavisku 6992,
91101 Trencin,
SK
Achtung: Unsere Modellbauprodukte sind kein Spielzeug! Unsere Modellbauprodukte sind nicht für Jugendliche unter 14 Jahren geeignet.