REDS SPEEDO Z8 GEN2 1/8 220A
ADVANCED TECHNOLOGY
Efficient cooling system that uses a cooling middle plate equipped with air ducts to channel fresh air directly to power PCB where the mosfet are installed. High efficiency dual PCB design with high performance power board and ultra fast response digital control board. Advanced Timing settings: two RPM based timing settings and one “Turbo” (full throttle) timing settings. Switched BEC 6V and 7.4V: Easily switch between 6V and 7.4V BEC voltage for the best servo performance. ABC motor wire order protection: in case of motor wire reversal, the ESC cannot be damaged.
IMPROVED ESC TUNING
REDS Racing Z8 220 ESC has different programmable functions. Functions set-up can be made with REDS Multifunction Program Box or with REDS Racing ESC SET-UP PC software. Firmware for both ESC and Program Box can be updated after downloading the appropriate firmware and PC software installation file.
Z8 ESC Gen2 Main Features:
- High Reliability and Durability: The Z8 Gen2 Pro Esc is built with the best quality components.
- Excellent power feeling and control thanks to power and brake control curve algorithms.
- Excellent Braking characteristics for constant braking feeling at every speed.
- Real time signal translation: The signals from the receiver are translated into throttle control signals in real-time for fastest throttle control.
- Improved cooling: Three piece lightweight precision machined aluminum case with machined air ducts for improved cooling.
- High efficiency dual PCB design with high performance power board and ultra fast response digital control board
- Advanced Timing settings: two RPM based timing settings and one “Turbo” (full throttle) timing settings
- Switched BEC 6V and 7.4V: Easily switch between 6V and 7.4V BEC voltage for the best servo performance
- ABC motor wire order protection: in case of motor wire reversal, the ESC cannot be damaged
Technical Data:
Categories |
1/8 Off Road Buggy and Truggy, 1/8 On Road |
Functions |
Forward/Brake and Forward/Brake/Reverse |
Current Continuous |
220 A |
Current Burst |
1500 A |
lnput |
3-6S LiPo |
Supported Motors |
Sensored/Sensorless Brushless Motor [Auto detect], 2pole, 4pole, 6pole |
Suitalble Motor |
4S LiPo/ 12cell NiMH: 3000KV for 4274 size, 6S LiPo/ 18cell NiMH: 2400KV for 4274 size |
BEC Output |
6V-7.4V @ 8A |
Size (LxWxH) |
55x40x34mm |
Weight |
140g |
Homologation |
BRCA, EFRA |